banner



Home  ›  Can You Use A Ykk Zipper In Place Of Ybs Zipper Repair

Can You Use A Ykk Zipper In Place Of Ybs Zipper Repair

Written By Tuesday, April 5, 2022 Add Comment Edit

Replace the Slider on a Plastic Tooth Zipper

Featured

  • Comments: 20
  • Favorites: xviii
  • Completions: 52

Featured Guide

Time Required

5 - x minutes

  • Plastic Zipper Slider 6 steps

Worn Wear

Worn Habiliment

Patagonia and iFixit are celebrating the stories we clothing past collaborating to provide guides for Patagonia'due south most pop apparel repairs.

Featured Guide

Featured Guide

This guide has been establish to be uncommonly cool by the iFixit staff.

Introduction

When a zipper pull breaks, or the slider merely wears out, you don't demand to supplant the unabridged zipper. Just replace the zipper slider and the finish that keeps it from sliding off. This is a quick repair that tin make the difference betwixt a zipper that doesn't work at all and i that works like information technology's brand new. Decide the size of your replacement slider by looking on the bottom of your existing slider.

For replacement parts or further assist, contact Patagonia Customer Service.

  • Cease Nippers
  • Tweezers
  • Large Needle Nose Pliers

Video Overview

  1. Locate the top of the zipper on the side with the slider. Use end nippers to cut the stop off of the zipper. Be careful to only cut the plastic, not the fabric.

    • Locate the top of the zipper on the side with the slider.

    • Use end nippers to cut the finish off of the attachment.

    • Be conscientious to only cut the plastic, not the material.

  2. Use tweezers to remove any remaining pieces of the stop from the garment.

    • Employ tweezers to remove whatever remaining pieces of the terminate from the garment.

  4. Slide the slider off of the garment. Slide the slider off of the garment. Slide the slider off of the garment.

    • Slide the slider off of the garment.

  5. Insert the new slider onto the zipper. You may need to tug a little to get the slider over the webbing from the old stop. Make sure the zipper slider is oriented right-side up when you slide it back onto the zipper.

    • Insert the new slider onto the zipper.

    • You may demand to tug a trivial to go the slider over the webbing from the old end.

    • Make sure the attachment slider is oriented right-side upwards when you slide it back onto the attachment.

  6. Grab a replacement stop. Position the new stop over the webbing in the same place where the old stop was located. Position the new stop over the webbing in the same place where the old stop was located.

    • Take hold of a replacement cease.

    • Position the new stop over the webbing in the same identify where the old stop was located.

  7. Use pliers to crimp the stop into place. Use pliers to crimp the stop into place.

    • Use pliers to crimp the stop into place.

xix Comments

Amazon has replacement parts, merely I establish you can get virtually whatsoever zipper parts from a sailing supply company chosen sailrite.com.

Scott Lamorte -

Perfect...give thanks you! I had seen nearly 10 other videos on how to do this repair but yours was the ane that showed me exactly how to do it and it worked perfectly the outset time. Much appreciated!

starrdustt57 - Answer

Thanks! This was great - I ordered the knippers and replacement parts for a jacket of mine that I broke, every bit I know my children will be breaking there'southward sooner or later on. It cost me $10 instead of $twoscore+ to replace a jacket.

Megan Elmore - Reply

Source: https://www.ifixit.com/Guide/Replace+the+Slider+on+a+Plastic+Tooth+Zipper/19448

Posted by: daubdasked1981.blogspot.com

0 Response to "Can You Use A Ykk Zipper In Place Of Ybs Zipper Repair"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel